Overview
Languages
English
Education
-
Secondary (high) school graduation certificate
- or equivalent experience
Experience
1 year to less than 2 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Asset languages
Work site environment
Work setting
-
Residential
-
Various locations
Responsibilities
Tasks
-
Apply successive coats of compound and sand seams and joints
-
Apply, level and smooth coats of plaster
-
Clean and prepare surfaces
-
Cure freshly plastered surfaces
-
Cut and install metal corner beads to protect exterior corners
-
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
-
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
-
Finish corners and angles and create decorative designs in finish coat, if required
-
Measure, cut, fit and install drywall sheets
-
Mix plaster ingredients to desired consistency
-
Mould and install ornamental plaster panels, cornices and trim
-
Position and secure sheets to metal or wooden studs or joists
-
Smooth out excess compound and allow coat to dry
-
Spray acoustic or texture materials over walls and ceilings
-
Tape over joints using taping machine and embed tape in compound
-
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
-
Attach metal or gypsum lath to studs or furring
-
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
-
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
-
Install corner beads and wire mesh around beams to which plaster is to be applied
-
Install exterior and interior steel studs
-
Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
-
Install vapour barriers and thermal and sound insulation
-
Prepare wall and ceiling layouts
Additional information
Security and safety
Transportation/travel information
Work conditions and physical capabilities
-
Bending, crouching, kneeling
-
Handling heavy loads
-
Manual dexterity
-
Physically demanding
-
Repetitive tasks
-
Standing for extended periods
-
Walking
Weight handling
-
Up to 23 kg (50 lbs)
-
Up to 45 kg (100 lbs)
Own tools/equipment
-
Hard hat
-
Mask
-
Safety glasses/goggles
-
Steel-toed safety boots
-
Tools
Personal suitability
-
Dependability
-
Excellent oral communication
-
Judgement
-
Reliability
-
Team player
Employment groups
This employer promotes equal employment opportunities for all job applicants, including those self-identifying as a member of these groups:
Support for newcomers and refugees
- Does not require Canadian work experience
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.