Discover jobs
Job Search
drywall taper
Posted on October 23, 2024 by Employer details Western 1 Drywall Ltd.
Job details
Education: Secondary (high) school graduation certificate. Tasks: Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Cut and install metal corner beads to protect exterior corners. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Spray acoustic or texture materials over walls and ceilings. Tape over joints using taping machine and embed tape in compound. Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Install exterior and interior steel studs. Prepare wall and ceiling layouts. Work at heights, on scaffolding or swing stages. Erect and install scaffolding, falsework and other working platforms. Read and interpret blueprints, maps, drawings and specifications. Experience: 2 years to less than 3 years.- LocationVictoria, BC
- Workplace information On site
- Salary$28.85HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Day, Evening, Morning
- Starts as soon as possible
- vacancies 5 vacancies
- Source Job Bank #3129738
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
2 years to less than 3 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Cut and install metal corner beads to protect exterior corners
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Spray acoustic or texture materials over walls and ceilings
- Tape over joints using taping machine and embed tape in compound
- Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install exterior and interior steel studs
- Prepare wall and ceiling layouts
- Work at heights, on scaffolding or swing stages
- Erect and install scaffolding, falsework and other working platforms
- Read and interpret blueprints, maps, drawings and specifications
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-12-18
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: