Discover jobs
Job Search
drywall installer
Posted on September 19, 2024 by Employer details Asset Rise Management
Job details
Education: Secondary (high) school graduation certificate. Tasks: Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install corner beads and wire mesh around beams to which plaster is to be applied. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Prepare wall and ceiling layouts. Experience: 1 year to less than 2 years.- Location61 central stSummerside, PEC1N 3L2
- Workplace information On site
- Salary$24.50HOUR hourly / 32.5 hours per week
- Terms of employment Permanent employmentFull time
- Start date Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3088410
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 year to less than 2 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Apply, level and smooth coats of plaster
- Clean and prepare surfaces
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Attach metal or gypsum lath to studs or furring
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Prepare wall and ceiling layouts
Who can apply to this job?
Only apply to this job if:
- You are a Canadian citizen, a permanent or a temporary resident of Canada.
- You have a valid Canadian work permit.
If you are not authorized to work in Canada, do not apply. The employer will not respond to your application.
Advertised until
2024-10-19
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: